Downdload : here
Remove the holder from its button: Img. 3
Insert, without forcing, the removal key Img. 2 into the slot marked by the arrow and slide the holder in the direction of the arrow. You can then screw the holder using two small screws.
To reinstall the button to the holder, slide it in the reverse direction until it clicks.
Attention: always make sure you have enough space available to reinsert the key for subsequent removal before locking.
When the battery is completely discharged, replace it with another Alkaline 23A 12V battery.
After removing the button holder, unscrew the three Phillips head screws and remove the cover.
Replace the battery with a new of the same type. Img. 5
Replace the cover. Check if it is well positioned on the silicone joint and tighten firmly but gently all three screws to ensure watertightness of the button.
Protect the nature. Deposit your batteries in a recycling collection center.
Technical specifications:
Power: Alkaline 23A-12Volts battery (Supplied)
Transmission distance: ± 200m
Water-resistant.
Dimensions: Ø 60mm x 22mm
Weight with battery: 42 grs
