Download: Click here
Function list:
F1: Setting a call button.
F2: Delete call button.
F3: Scrolling time number setting (0 to 20 seconds – Default setting 5 seconds)
F8: Display time setting (0 to 60 seconds – Default setting 20 seconds)
F9: Restore factory default settings.
To enter into a function to set:
1/ Press « FUN » on the watch to read F- -1 (1 flashes).
2/ Press « SEL » to scroll through the « F » functions from 1 to 9.
3/ Once the desired F function is displayed, press « ENT » to get into it.
To exit press « FUN », the screen will display – –
To cancel a setting press « FUN »
Note: if you do not touch any button during 40 seconds the watch will automatically exit the programming mode.
FUNCTION 1, Setting a call button:
1/ Enter into function 1 by pressing « FUN », « F1» will be displayed and «1» flashes.
2/ Press « ENT »: 1 will be displayed and 1 flashes.
3/ Press « NEXT » or « SEL » to select the number to assign to button 01 to 99.
4/ Once the number is selected press « ENT » and _ _ _ _ is displayed on the screen.
5/ Take a button and press « Bell » or « € » during 2 seconds.
a/ The screen gives a double « beep » to confirm the set button and displays the next number.
To set the button with the number displayed on the receiver, press « ENT » to display _ _ _ _ Then take a button and press on « Bell » or « € » during 2 seconds.
The screen gives a double « beep » to confirm the set button.
b/ To set the button with a different number that the one displayed on the receiver, repeat the setting from point «3/».
Attention:
• If the watch-receiver displays « E1 » : that means the desired number is already set to another button; it should be deleted by function «F2».
• If the watch-receiver displays « E3 » : », the maximum number of buttons has been achieved.
FUNCTION 2, Delete call button:
1/ Enter into function 1 by pressing « FUN » during 3 seconds: «F1» will be displayed and «1» flashes.
2/ Press « SEL » to go to F2.
3/ Press « ENT »: 01 will be displayed.
4/ Scroll through the numbers by pressing « SEL » or « NEXT» button to select the call button you want to delete.
5/ Confirm the deletion by pressing « ENT». The screen emits a double “beep” to confirm deletion of the call button. If you choose the «00» position all buttons will be deleted.
FUNCTION 3, Scrolling time number setting (0 to 20 seconds)
(Default setting: 5 seconds)
1/ Enter into function 3 by pressing « FUN »: «F1» will be displayed and «1» flashes.
2/ Press « SEL» to go to «F3».
3/ Press « ENT»: «01» will be displayed.
4/ Press « NEXT » and « SEL » to set the scrolling time from 01 to 20 seconds. (If you choose «00», there will be no scrolling. Only the last number will display according to the setting of function «8»)
5/ The screen emits a double “beep” to confirm the scrolling time setting.
6/ Press «FUN» to exit.
FUNCTION8, Display time setting (0 to 60 seconds)
(Default setting: 20 seconds)
1/ Enter into function «8» by pressing « FUN »: «F1» will be displayed and «1» flashes.
2/ Press « SEL » to go to «F8».
3/ Press « ENT»
4/ Press «NEXT» and «SEL» to set the scrolling to set numbers display time (default setting 20 seconds). This means, that if after 20 seconds the call was not canceled manually, the order will be automatically canceled by your display time setting.
Choosing 00 seconds, the requests can only be canceled manually.
5/ The screen emits a double “beep” to confirm the display time setting.
6/ Press «FUN» to exit.
FUNCTION 9, Restore factory default settings
1/ Enter into function «9» by pressing « FUN »: «F1» will be displayed and «1» flashes.
2/ Press « SEL» to go to «F9».
3/ Press « ENT»: «01» will be displayed.
4/ Press « SEL» ou «Next» to scroll through the numbers until number N° 00.
5/ Press «ENT» to confirm: the screen quickly shows number from 00 to 99.
The screen displays two kinds of information according to the request from the transmitter:
1/ The No flashes.
2/ The No remain still.
The knob on the side adjusts the volume of the screen.
IMPORTANT: Use only the power supply provided in order to avoid damage on the material that would not be covered by the factory warranty.
Do not forget deploying the antenna for optimal reception.
FIXING:
For wall mounting, screw the provided gray plate. Place the back of the screen against the platen and engage the ergo thereof into the holes of the screen, then drag it aside until it clicks. Make the opposite movement to unhook it.
For fixing it on the table. Screw the gray plate to the black support with the supplied bolts. Then fix on the table with two screws or a double side tape. Then fix the screen on the plate in the same way.
Technical specifications:
Model: SR.004.01
Power supply: DC 12V
Amperage: 450 mA
Frequency: 433 MHz
Maximum adjustable sound level: 110 dB
Audio output: 2 W
Dimensions: 250mm x 180mm x 32mm
Weigh with stand: 555 grs
