User Manual ServiceWatch™
Download : Here
To turn the watch on: Press « FUN » 3 seconds (The watch lights up and displays the time) To turn the watch off: 1) Press « FUN » 3 seconds to read « F- -1 » (the 1 flashes) 2) Repeatedly press « SEL » until read « F- -7 » 3) Press « ENT » to display « OFF » 4) Press « ENT » again to turn it off. 
What happens if the customer presses the « Bell » or « € » button? The watch displays the «Beep» number (the table in question) and the requested service by a “figure” to call for service and a “$” to ask for the bill.
To cancel a request, 2 possible solutions: • Either directly on the “Beep” by pressing the « » • Either directly on the watch-receiver by pressing « ENT » How does the watch-receiver display multiple simultaneous calls? The watch receives requests, keeps them in memory and displays the number of last calls.
To scroll through all calls on hold: Press « NEXT » or « SEL » to scroll through the numbers of calls forward or rearward. Display mode: The watch displays the last call and stores the last 10. Fonctions list: F1: Setting a call button.
F2: Delete call button.
F4: Time setting.
F5: Remind mode setting.
F6: Display mode setting.
F7: Power off.
F8: Button type setting (single-key button or multi-key button).
F9: Restore factory default settings.
To enter into a function to set: 1/ Press « FUN » on the watch to read F- -1 (The 1 flashes).2/ Press « SEL » to scroll through the « F » functions from 1 to 9. 3/ Once the desired F function is displayed, press « ENT » to get into it. To exit press « FUN », the screen will display the time again and turn into “stand by” mode. Note: if you do not touch any button during 40 seconds the watch will automatically exit the programming mode.
FUNCTION 1, Setting a call button: 1/ Enter into function 1 by pressing « FUN » during 3 seconds: « F–1» will be displayed and «1» flashing. 2/ Press « ENT »: 0001 will be displayed and 1 flash. 3/ Press « NEXT » or « SEL » to select the number to assign a button 0001 to 9999. 4/ Once the number is selected press « ENT » and _ _ _ _ is displayed on the screen. 5/ Take a button and press « Bell » or « € » during 2 seconds. The watch gives a double « beep » to confirm the set button and displays the next number.
a/ To set the button with the number displayed on the receiver, press « ENT » to display _ _ _ _ Then take a button and press on « Bell » or « € » during 2 seconds. The watch gives a double « beep » to confirm the set button and displays the next number and so on. b/ To set the button with a different number that the one displayed on the receiver, repeat the setting from point «3/». Attention: • If the watch-receiver displays « E2 », that means the desired number is already set to another button; it should be deleted by function F2. • If the watch-receiver displays « E3 », the maximum number of buttons has been achieved.
FUNCTION 2, Delete call button: 1/ Enter into function 4 by pressing « FUN » during 3 seconds: « F–1» will be displayed and «1» flashing. 2/ Press « SEL » to go to F2. 3/ Press « ENT »: 0001 will be displayed. 4/ Scroll through the numbers by pressing « SEL » button to select the call button you want to delete. 5/ Confirm the deletion by pressing « ENT ».The watch emits a double “beep” to confirm deletion of the call button. If you choose the 0000 position all buttons will be deleted.
FUNCTION 4, Time setting: 1/ Enter into function 4 by pressing « FUN » during 3 seconds: « F–1» will be displayed and «1» flashing. 2/ Press « SEL » to go to « F4 » 3/ Press « ENT » 4/ Set the minutes by pressing « SEL » 5/ Press « NEXT » and set the time by pressing «SEL» 6/ Press « FUN » to exit the function.
FUNCTION 5 , Remind mode setting (Sound Alert – Vibration or both): 1/ Enter into function 5 by pressing « FUN » during 3 seconds: « F–1» will be displayed and «1» flashing. 2/ Press « SEL » go to « F5 » 3/ Press « ENT » 4/ Choose the type alert 1 – 2 – 3 • 1 : The watch beeps • 2 : The watch vibrates. • 3 : The watch beeps and vibrates. 5/ Press « FUN » to exit the function.
FUNCTION 6, Display mode setting: 1/ Enter into function 6 by pressing « FUN » during 3 seconds: « F–1» will be displayed and «1» flashes. 2/ Press « SEL » to go to F6. 3/ Press « ENT » to display « 1- 2 or 3 ». • 1: The watch displays the icons «$ and waiter». • 2: The watch displays the letters «A and C» instead of icons. • 3: The watch displays the letters «A and C» and the icons «$ and waiter». 4/ Press « ENT » to confirm.
FUNCTION 7, Power off: 1/ Enter into function 7 by pressing « FUN » during 3 seconds: « F–1» will be displayed and «1» flashes. 2/ Press « SEL » to go to F7. 3/ Press « ENT » to display « 0FF ». 4/ Press « ENT » to confirm.
FUNCTION 8, Button type setting (single-key button or multi-key button): 1/ Enter into function 8 by pressing « FUN » during 3 seconds: « F–1» will be displayed and «1» flashes. 2/ Press « SEL » go to « F8 ». 3/ Press « ENT » 4/ Choose the type of button: •1 for single-key button. •4 for multi-key button.
FUNCTION 9, Restore factory default settings: 1/ Enter into function 9 by pressing « FUN » during 3 seconds: « F–1» will be displayed and «1» flashing. 2/ Press « SEL » to o to F9. 3/ Press « ENT » to display 0001. 4/ Scroll through by pressing « SEL (back) » « NEXT (forward) » and choose N° 0000. 5/ Confirm by pressing « ENT »: the watch quickly shows number from 1111 to 9999 to confirm restoration of factory settings. Technical specifications: 3,7 V supply (Li-ion battery) – 50m. Frequency: 433,92 MHz ± 75k. Size 65mm x 44mm x 19mm. Weight: 58grs.
